We prepare doors for IKEA systems as well as custom-made furniture. Select the appropriate category and you will be redirected to a page, where you can choose the available patterns.
Before ordering, read the most frequently asked questions by our customers.
Order samples to check the materials, finishes and colors of our products.
Remember about the details. Choose eye-catching accessories and practical accessories to fully bring out the beauty and functionality of your project.
Before ordering, read the most frequently asked questions by our customers.
Get inspired by our IKEA-based furniture collection and match it to your interior. Enlarge the wardrobe by using extensions for the PAX system.
Before ordering, read the most frequently asked questions by our customers.
Order samples to check the materials, finishes and colors of our products.
Use side masking panels that will be finished in the same color or decor as the fronts and create your dream piece of furniture based on METOD cabinets. With a few simple steps and the right tools, you can easily install masking elements.
Step 1: Assemble the METOD cabinet according to the IKEA instructions.
Step 2: Install the side panels
First, install the side panels. You will need a screwdriver or automatic screwdriver. Use the screws from the inside of the cabinet, thanks to which the connection between the panel and the cabinet will not be visible from the outside. We recommend screwing through the existing holes in the cabinet. Use screws in each corner and along the front edge - from 2 to 4 screws depending on the height of your structure. Use screws with a maximum length of 28mm.
Step 3: Install the top panel (and bottom panel if your design includes a bottom panel).
Place the panel against the top of the cabinet. Make sure the back edge of the panel is flush with the wall and the edges are flush with the side panels. Use screws from the inside of the METOD cabinet.
Repeat this step for the bottom panel.
